λέ_ητεσ_πέλλετ_-_the_most_efficient_for_commercial

.:batman.gyptis.org:.
Cette page est en lecture seule. Vous ne pouvez pas modifier le texte source. Contactez votre administrateur si vous souhaitez l'éditer.
.

You may understand that a heat pump is a machine that is predicated on either a mechanical device or chemical substance to warm or cool a building. Such pumps which perform heat operation during the winter and cooling operation in the summer, so it acts like both an air conditioner and a furnace. It is wise to install both heating and cooling setups, because a single system performs both jobs. This double feature stands it out from other temperature controllers. Heat appliances are distinct in kinds, but all of them operate on the same theory that means moving heat from one location to another.

In Fact, the market is stuffed with assortment of heating equipments for residential programs and commercial/institutional buildings, but there are two types of appliances which can stand head and shoulder above other pumps concerning efficiency, operation, technology, cost effectiveness. However, you may get puzzled at the various names of Geothermal Heat Pump also known as Ground Source, Geo-exchange, Ground Coupled, Earth Coupled, Ground Water Source, Well Water, and Solar Energy Heat Pump. They all are similar within the their operations and nearly corresponding inside their applications but totally distinct in names, in fact, advertising gimmicks to be able to differentiate it from other heating system pumps.

Applications and Operations of Two Most Efficient Heat Pumps:

Ground source heat pumps is actually a fascinating option for heating up and cooling up not only commercial but also residential buildings by the virtue of their higher energy efficiency as compared with standard systems. In the recent past, heat equipments were more or less unreliable and even clamorous when they got used. But now scenario has changed. Heating appliances own sharp-edge technology which makes the Pumps more efficient and reliable. Ground Source Pumps have been employed for the last several years in developed countries, and the pumps have been installed in a number of esteemed institutions, universities, and companies where cooling and heat loads are really high, however ground source αντλίες θερμότητας have been performing excellently.

Geothermal αντλίες θερμότητας use the earth as a heat source when functioning in heating mode, with a fluid (normally water) as the medium that transfers the heat from the earth to the evaporator of the heating pump, therefore using geothermal energy. In cooling mode, they use the earth as a heat sink, with Borehole Heat Exchangers that enables Ground Coupled pumps to offer both heat and cooling at potentially any place and in any climate with excellent flexibility to meet any needs. Geothermal pumps are used to cool a building either little or large and act like a fridge, too as this pump gets applied for heating hot water. Geothermal heat pumps have been used for about 50 years, now in fact this technology with fossil fuels is being created for space cooling. More over these pumps consume up to 44% less energy than air-source warming appliance.

Heat pump maintenance starts with regular filter replacement. If you select disposable filters, use the low-cost blue or white fiberglass net type. The more expensive pleated paper filters can confine the flow of air in the system making it work longer. Alter these filter monthly.

In case you have an access tube within the condensate drain line at the air handling unit, pour about 1/2 cup of bleach into the line if you change the filter. This may help to keep the line clean and reduce the possibility that it'll clog and push water in your home. Should you not have an access tube, consider having one installed at the next service call.

Use a garden hose to wash the fins on the condenser (the outdoor unit) about once per month. Keep walls and plants at least 1 foot from the sides and 10 feet from the top of the condenser. Keep the condenser shaded from direct sun to the extent practical.

Finally, have preventative maintenance service performed on the system at least once per year.

Like all mechanical components, heat pumps wear out. Condensers commonly last between about 5 and 15 years.

Air handlers normally last between 15 and 20 years. Heat pumps are a good option for heat and cooling in warm climates where gas service is not available. A gas furnace is usually a more cost effective alternative where gas service is available. Heat pumps can provide energy efficient service for a lot of years when correctly installed, operated, and kept [[http://meturazzi.com/blogs/viewstory/22269|Home Page]].
Vues

Navigation

Outils personnels

Recherche

Boîte à outils
